Vuichard Michel SA has 43 years’ experience in electrical discharge machining. For its micro-machining subcontracting work, it has a Matsuura centre with a ground bed, a 60,000 rpm spindle and 0.1μ travel for 5-axis micro-milling with cutters larger than 0.04 mm in diameter, six wire EDM machines for wire diameters greater than 0.03 mm, two Sarix machines for micro-drilling holes with a diameter of more than 0.025 mm, and finally ten die-sinking EDM machines for shapes larger than 0.02 mm.

(…)